There are many glue filling methods. Usually, there are two-component glue filling methods (two-component epoxy resin, two-component polyurethane, two-component silicone rubber and other two-liquid resin materials)

 

Floor type automatic glue filling equipment

 

1. Manual operation glue filling: that is, the technician stirs the glue and immediately puts it into the transformer (if it is required to be vacuumized) process: weigh the glue preparation - mix the glue - vacuumize - fill the product

 

Advantages: fast use in short time and low price

 

Disadvantages: the glue should be used up within the available time. The amount of resin poured into the product is less and the integrity is not good. Occasionally, the glue will not be stirred evenly and the glue will be consumed

 

2. Semi automatic dispensing machine: technician stirs the glue, and uses the glue flow specified by the equipment: call for the preparation of epoxy resin and curing agent - technician stirs - vacuumizes - glue flow specified by the equipment

 

Advantage: the glue pouring method can get the same amount of product glue

 

Disadvantages: the glue should be used within the available date. Every time it is used, it must be cleaned to deepen the labor volume, and there are many consumable materials

 

Semi automatic filling system

 

3. Automatic double liquid filling machine

 

The equipment draws materials by itself and vacuumizes by itself, so as to ensure that the single component glue is free of gas. The glue pouring method is to prepare the specified glue, mix it by itself, and make the glue flow well

 

Self pumping: ab rubber self pumping and self vacuumizing;

 

Liquid level alarm: automatic prompt function of upper liquid level and lower liquid level

 

Cleaning function: self cleaning

 

Mixing function: dynamic mixing

 

Control area: 1:1-10:1 random control

 

Application fields: two-component epoxy resin, two-component polyurethane, two-component silicone rubber and other two-liquid resin materials

 

Advantages: the glue filling method is easy to use - the technician only needs to take the product and place the product, with good integrity, smooth surface and low consumption

 

Disadvantages: high price in a short period of time, products with large output and high regulations are usually available

 

Multi head glue filling equipment