Because of its high bonding strength and filling quality, PC glue can play a key role in the application and production of many industries. There are also some precautions for the control of PC glue by dispenser, which are mainly related to the operation of use and storage. There are so many PC glues available in the market. Therefore, it is correct to combine the viscosity and quality required for selection.

 

PC filling adhesive

 

There are three points for attention of PC glue, mainly selection, use and storage.

 

1. Selection

 

The purchase of PC glue is also a detail that can not be ignored. Even if the glue is non-toxic and harmless, the user needs to choose the genuine product or the proper PC glue from the regular exclusive store. In addition, the glue with better quality and better bonding performance can be selected after the recommendation of the shop assistant. Therefore, it is more targeted for the compatible operation of dispensing machine, and for product filling and sealing Link use has a relatively high advantage.

 

 

 

2. Use

 

The correct control according to the standard is very important in the use of PC glue. First of all, the surface of the bonding object needs to be wiped clean as far as possible. If there are dust or impurities on the surface, the bonding strength and quality of the product will be greatly reduced. Therefore, it is necessary to completely clean the surface and remove all moisture and dust in order to normally fill and ensure the required strength and quality, In addition, the glue can only be used for bonding or sealing effect after it is filled evenly, and the bonding material surface can be fully contacted to ensure a higher bonding quality and strength effect.

 

Air conditioning plastic shell adhesive

 

3. Storage

 

Glue storage has always been a hot topic, which is also included in the precautions for PC glue. It is usually placed in a relatively cool, dry and dust-free clean process. The key point is that there is no heat source around the storage location. The heat source will cause the water content of PC glue to gradually evaporate and the bonding ability will begin to disappear. If it is not found for a long time, this bottle of PC glue will not It can be used normally again.

 

Production line dispensing

 

All users also need to purchase suitable glue according to the viscosity and characteristics of PC glue, and ensure that the glue purchased is regular and can maintain stable strength. Pay attention not to touch the human body or clothes when dispensing, so as to prevent the glue from causing discomfort to the human body or damaging clothes.